- Testing Redefined
- +91 81081 23468
- hm@syselec.net
OHE Maintenance Hot line tools
Filters Sort results
Reset Apply
Syselec Product ID | Product Image | Item Name / Catalogue Description | Product Category | Dimensions / Size | Application | Add to cart |
|---|---|---|---|---|---|---|
| SYS-TEC-TM02120140-01 |  | Adjustable insulator forks | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Supports, guides, or positions insulators during installation and maintenance. | |
| SYS-TEC-TM03150201-01 |  | Adjustable Pole Clamp | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Secures temporary support equipment to a pole or insulated pole during line work. | |
| SYS-TEC-TM12070605-01 |  | All-angle grounding clamp (with large jaw) | Temporary Grounding Equipment and Hot Sticks | Connection range Ø 6.5-73 mm; cable terminal range 16-95 mm². | Connects a temporary grounding cable to the stated conductor, busbar, bushing, or ground point. | |
| SYS-TEC-TM02120107-01 |  | All-angle pliers | Insulated Hand Tools | Physical dimensions are not stated in the provided datasheet. | Grips and manipulates small line components at different approach angles using a hot stick. | |
| SYS-TEC-TM10030101-01 |  | Assistance pulley bracket | Compact Networks | To be designed as per IEC, ASTM codes | Supports a pulley used to guide conductor or cable during compact-network installation. | |
| SYS-TEC-TM03080105-01 |  | Auxiliary arm assembly | Conductor Support Equipment | Auxiliary-arm stick Ø 64 × 1780 mm insulated length; mast pole Ø 64 × 1360 mm insulated length. | Provides temporary multi-point support for conductors when the normal crossarm arrangement is disturbed. | |
| SYS-TEC-TM03080101-01 |  | Auxiliary crossarm | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Provides temporary multi-point support for conductors when the normal crossarm arrangement is disturbed. | |
| SYS-TEC-TM02120104-01 |  | Ball socket adjuster, long | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Aligns and manipulates ball-and-socket insulator hardware during assembly or maintenance. | |
| SYS-TEC-TM02120130-01 |  | Ball socket adjuster, short | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Aligns and manipulates ball-and-socket insulator hardware during assembly or maintenance. | |
| SYS-TEC-TM12070104-01 |  | Ball socket grounding clamp | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Connects a temporary grounding cable to the stated conductor, busbar, bushing, or ground point. | |
| SYS-TEC-TM09040101-01 |  | Bare-hand stick | Bare-hand Equipment | Rod Ø 32 mm (1-1/4 in); insulating length 340 mm (1 ft 4 in); connection range Ø 12-48 mm. | Supports bare-hand or equipotential live-line work by allowing controlled handling at conductor potential. | |
| SYS-TEC-TM12070403-01 |  | Bus-bar grounding clamp | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Connects a temporary grounding cable to the stated conductor, busbar, bushing, or ground point. | |
| SYS-TEC-TM12070401-01 |  | C-type grounding clamp for substation | Temporary Grounding Equipment and Hot Sticks | Connection range: minimum Ø 5 mm; maximum Ø 50 mm or rectangular bars 12 × 100 mm. | Connects a temporary grounding cable to the stated conductor, busbar, bushing, or ground point. | |
| SYS-TEC-TM12070302-01 |  | C-type grounding clamp, T-handle | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Connects a temporary grounding cable to the stated conductor, busbar, bushing, or ground point. | |
| SYS-TEC-TM03080104-01 |  | C-type wire holder, no insulator | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Temporarily holds and positions a conductor during live-line construction or maintenance. | |
| SYS-TEC-TM01120101-01 |  | Cable wire rope grip puller | Load Handling Equipment | Cable diameter range: Ø 5.08-10.16 mm (0.20-0.40 in). | Grips and tensions conductor, guy wire, or wire rope during line construction, sagging, or maintenance. | |
| SYS-TEC-TM13060101-01 |  | Canvas bag for insulated gloves | Tool Bags | To be designed as per IEC, ASTM codes | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM13060201-01 |  | Canvas bag for insulated gloves and sleeves | Tool Bags | To be designed as per IEC, ASTM codes | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM13010201-01 |  | Canvas bucket No. 8, canvas bottom | Tool Bags | Size designation: No. 8; physical dimensions not specified | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM13050101-01 |  | Canvas hot stick bag, for sectional hot stick | Tool Bags | To be designed as per IEC, ASTM codes | Provides modular insulated reach for operating line hardware or applying grounding equipment. | |
| SYS-TEC-TM13050201-01 |  | Canvas hot stick storage bag | Tool Bags | To be designed as per IEC, ASTM codes | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM13020201-01 |  | Canvas storage bag for three-phase grounding set | Tool Bags | To be designed as per IEC, ASTM codes | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM13040201-01 |  | Canvas tool bag (lockable) | Tool Bags | length 500 mm × height 330 mm × width 190 mm. | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM13010101-01 |  | Canvas tool bucket | Tool Bags | To be designed as per IEC, ASTM codes | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM13040301-02 |  | Canvas tool pouch with shoulder strap, without lid | Tool Bags | Syselec ID uniquely identifies this pictured variant. | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM13040301-01 |  | Canvas tool pouch, with lid and shoulder strap | Tool Bags | Height 350 mm × width 300 mm × thickness 80 mm; shoulder strap length 1000 mm. | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM02120116-01 |  | Chuck blank | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Serves as a universal tool holder for attaching a suitable custom or interchangeable hot-stick tool. | |
| SYS-TEC-TM02120129-01 |  | Clamp stick head | Insulated Hand Tools | Clamp capacity up to 152 mm | Engages and operates compatible clamps from a hot stick while maintaining working distance. | |
| SYS-TEC-TM12170101-01 |  | Clamp stick head, locking system by adjustable pressure half-ball | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Engages and operates compatible clamps from a hot stick while maintaining working distance. | |
| SYS-TEC-TM02120133-01 |  | Clear vision mirror | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Provides remote visual inspection of hidden or obstructed components near energized equipment. | |
| SYS-TEC-TM03050301-01 |  | Clevis device for auxiliary crossarm | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Connects and supports an auxiliary crossarm assembly during temporary conductor support work. | |
| SYS-TEC-TM01160101-01 |  | Coil catcher | Load Handling Equipment | To be designed as per IEC, ASTM codes | Captures and controls a coil or loose conductor during handling to reduce uncontrolled movement. | |
| SYS-TEC-TM02120155-01 |  | Conductor cleaning brush | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Cleans conductor surfaces before installing clamps, jumpers, connectors, or other line hardware. | |
| SYS-TEC-TM02120168-01 |  | Conductor cleaning brush, V position | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Cleans conductor surfaces before installing clamps, jumpers, connectors, or other line hardware. | |
| SYS-TEC-TM07070301-01 |  | Conductor cover | Insulating Cover-up Equipment | Length 1560 mm (5 ft 1 in); suitable conductor diameter up to 25 mm. | Temporarily covers an energized conductor to reduce accidental contact and phase-to-ground exposure. | |
| SYS-TEC-TM02120122-01 |  | Cotter key holder | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Installs, holds, or removes cotter keys and retaining pins from line hardware using a hot stick. | |
| SYS-TEC-TM02120158-01 |  | Cotter key puller | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Installs, holds, or removes cotter keys and retaining pins from line hardware using a hot stick. | |
| SYS-TEC-TM03280704-01 |  | Cradle spacer | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Maintains spacing and separation within a temporary conductor-support or cradle arrangement. | |
| SYS-TEC-TM03070207-01 |  | Cross arm clamp | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Secures an auxiliary crossarm or support assembly to a pole or structure. | |
| SYS-TEC-TM03110101-01 |  | Crossarm conductor support | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Temporarily supports a conductor at crossarm level during maintenance or component replacement. | |
| SYS-TEC-TM02120113-01 |  | Cutout tool | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Operates fuse cutouts or fuse switches from an insulated distance. | |
| SYS-TEC-TM06080106-01 |  | Diagonal crosspiece | Insulated Scaffold and Ladders | Diagonal scaffold crosspiece length: 1410 mm. | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM01090108-01 |  | Double rope block | Load Handling Equipment | Width 80 mm (3-1/8 in); length 300 mm (11-3/4 in). | Provides mechanical advantage for lifting, lowering, or positioning tools and components using rope. | |
| SYS-TEC-TM06040201-01 |  | Double stringer extension ladder | Insulated Scaffold and Ladders | To be designed as per IEC, ASTM codes | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM06090201-01 |  | Extension ladder with oblong profile and fiberglass steps | Insulated Scaffold and Ladders | Profile P70; closed length 3.45 m (11 ft 2 in); open length 5.86 m (18 ft 4 in); 19 steps. | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM06120111-01 |  | Fiberglass mobile platform ladder | Insulated Scaffold and Ladders | To be designed as per IEC, ASTM codes | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM12070702-01 |  | Flat-face grounding clamp | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Connects a temporary grounding cable to the stated conductor, busbar, bushing, or ground point. | |
| SYS-TEC-TM12070701-01 |  | Flat-face grounding clamp (bench vice type) | Temporary Grounding Equipment and Hot Sticks | Connection range 3.2-38 mm for rectangular bars; cable terminal range 16-95 mm². | Connects a temporary grounding cable to the stated conductor, busbar, bushing, or ground point. | |
| SYS-TEC-TM02120136-01 |  | Flexible wrench head | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Operates fasteners or hardware from a universal hot stick during energized or restricted-access maintenance. | |
| SYS-TEC-TM03070201-01 |  | Fork type wire holder | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Temporarily holds and positions a conductor during live-line construction or maintenance. | |
| SYS-TEC-TM02120145-01 |  | Fuse puller | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Removes or installs fuse holders and related components from an insulated distance. | |
| SYS-TEC-TM08120101-01 |  | Glove tester | Instruments and Meters | To be designed as per IEC, ASTM codes | Inflates insulating gloves so the user can check for air leaks, punctures, or visible damage before use. | |
| SYS-TEC-TM02020101-01 |  | Grip-all clampstick (Shotgun stick) | Insulated Hand Tools | Datasheet variant TM02020106: rod Ø 32 mm (1-1/4 in); insulating length 540 mm; total length 1430 mm. | Operates clamps, switches, and line hardware from an insulated working distance during live-line maintenance. | |
| SYS-TEC-TM12100102-01 |  | Ground clamp cluster | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Groups grounding clamp connections for organized temporary grounding arrangements. | |
| SYS-TEC-TM12070705-01 |  | Ground clamp for connection to ground point (mobile jaw) | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Connects a temporary grounding cable to a designated ground point using a mobile-jaw clamp. | |
| SYS-TEC-TM12110101-01 |  | Ground cluster bar | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Creates an equipotential connection point for multiple temporary grounding leads. | |
| SYS-TEC-TM02120125-01 |  | Hack saw | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Provides remote sawing of suitable components using a universal hot stick. | |
| SYS-TEC-TM02120151-01 |  | Hammer with universal adapter | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Connects a specialized attachment to a universal hot stick for remote electrical maintenance work. | |
| SYS-TEC-TM01100101-01 |  | Hand line block with forged steel hook | Load Handling Equipment | suitable for rope up to Ø 5/8 in (15.9 mm). | Used with a hand line to lift, lower, or position tools and materials on poles or structures. | |
| SYS-TEC-TM01100103-01 |  | Hand line block with meat hook | Load Handling Equipment | suitable for rope up to Ø 1/2 in (12.7 mm). | Used with a hand line to lift, lower, or position tools and materials on poles or structures. | |
| SYS-TEC-TM01100201-01 |  | Hand line hook | Load Handling Equipment | To be designed as per IEC, ASTM codes | Provides an attachment point for hand lines when lifting or controlling tools and materials. | |
| SYS-TEC-TM12170302-01 |  | Head for operation of fuse switches | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Operates fuse cutouts or fuse switches from an insulated distance. | |
| SYS-TEC-TM02020201-01 |  | Hinged grip-all clampstick (Hinged shotgun stick) | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Operates clamps, switches, and line hardware from an insulated working distance during live-line maintenance. | |
| SYS-TEC-TM02120174-01 |  | Hot line applicator | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Applies or positions hot-line accessories and fittings from an insulated working distance. | |
| SYS-TEC-TM02120117-01 |  | Hot rodder tool | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Installs or removes preformed conductor ties and similar line fittings using a hot stick. | |
| SYS-TEC-TM02120117-02 |  | Hot rodder tool | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Installs or removes preformed conductor ties and similar line fittings using a hot stick. | |
| SYS-TEC-TM13050301-01 |  | Hot stick bag, for single hot stick | Tool Bags | To be designed as per IEC, ASTM codes | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM14030201-01 |  | HV crossarm pulley | De-energized Networks Equipment | To be designed as per IEC, ASTM codes | Guides cable or conductor during pulling, paying-out, or installation on the stated network structure. | |
| SYS-TEC-TM10030102-01 |  | Input pulley bracket | Compact Networks | To be designed as per IEC, ASTM codes | Supports a pulley used to guide conductor or cable during compact-network installation. | |
| SYS-TEC-TM02190103-01 |  | Insulated adjustable wrench | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Tightens or loosens fasteners near energized parts while providing an insulated handle. | |
| SYS-TEC-TM02130101-01 |  | Insulated bolt cutter | Insulated Hand Tools | Size 24 in; handle/rod Ø 32 mm (1-1/4 in); insulating length 350 mm (13-3/4 in); cutting capacity Ø 11.11 mm (7/16 in). | Cuts bolts, wire, or conductor-related hardware while providing insulation between the user and the work area. | |
| SYS-TEC-TM02190101-01 |  | Insulated Fix Wrench | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Tightens or loosens fasteners near energized parts while providing an insulated handle. | |
| SYS-TEC-TM05110101-01 |  | Insulated hanger | Insulated Jumper Tools | To be designed as per IEC, ASTM codes | Supports and positions insulated temporary jumpers to control clearance and mechanical loading. | |
| SYS-TEC-TM02130301-01 |  | Insulated lever type wire cutter | Insulated Hand Tools | Rod Ø 32 mm (1.26 in); insulating length 1160 mm (45.67 in); cutting capacity Ø 10.11 mm (0.40 in). | Cuts bolts, wire, or conductor-related hardware while providing insulation between the user and the work area. | |
| SYS-TEC-TM06-ASSY-01 |  | Insulated modular scaffolding assembly (catalogue illustration) | Insulated Scaffold and Ladders | Configuration-dependent; assembled from modular scaffold components | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM02190102-01 |  | Insulated Socket Wrench | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Tightens or loosens fasteners near energized parts while providing an insulated handle. | |
| SYS-TEC-TM06070101-01 |  | Insulated stool | Insulated Scaffold and Ladders | To be designed as per IEC, ASTM codes | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM02060101-01 |  | Insulating grip pole for pliers | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Allows plier-type operations to be performed from an insulated distance near energized equipment. | |
| SYS-TEC-TM05050201-01 |  | Jumper set for hotstick applications, with snap-on (duckbill-type) clamp | Insulated Jumper Tools | To be designed as per IEC, ASTM codes | Provides a temporary insulated electrical bypass so service continuity can be maintained during maintenance. | |
| SYS-TEC-TM02120123-01 |  | Locating pin | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Aligns holes and positions pins in line hardware during assembly or maintenance. | |
| SYS-TEC-TM14030301-01 |  | LV cable release pulley, rack fitting | De-energized Networks Equipment | To be designed as per IEC, ASTM codes | Guides cable or conductor during pulling, paying-out, or installation on the stated network structure. | |
| SYS-TEC-TM01110201-01 |  | Nylon webbing sling | Load Handling Equipment | To be designed as per IEC, ASTM codes | Wraps and supports equipment or components for lifting and handling without direct metal-to-surface contact. | |
| SYS-TEC-TM02120112-01 |  | Pin holder | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Holds pins or small line hardware during installation, removal, or alignment from a hot stick. | |
| SYS-TEC-TM14040101-01 |  | Pole belt | De-energized Networks Equipment | To be designed as per IEC, ASTM codes | Assists a lineworker in climbing or positioning on a utility pole under an approved work-at-height procedure. | |
| SYS-TEC-TM03050208-01 |  | Pole clamp | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Secures temporary support equipment to a pole or insulated pole during line work. | |
| SYS-TEC-TM07010304-01 |  | Pole cover | Insulating Cover-up Equipment | To be designed as per IEC, ASTM codes | Temporarily covers a pole or adjacent surface to reduce accidental contact during live-line work. | |
| SYS-TEC-TM02010101-01 |  | Pole wrench | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Provides leverage for turning, aligning, or handling utility poles during installation and maintenance. | |
| SYS-TEC-TM02120126-01 |  | Pruning saw | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Trims vegetation near overhead conductors while maintaining increased working distance. | |
| SYS-TEC-TM14030401-01 |  | Pulley for cable release in transmission lines | De-energized Networks Equipment | To be designed as per IEC, ASTM codes | Guides cable or conductor during pulling, paying-out, or installation on the stated network structure. | |
| SYS-TEC-TM14030101-01 |  | Pulley for multiplex cable release | De-energized Networks Equipment | To be designed as per IEC, ASTM codes | Guides cable or conductor during pulling, paying-out, or installation on the stated network structure. | |
| SYS-TEC-TM06080118-01 |  | Rails for scaffolding | Insulated Scaffold and Ladders | Three pairs of 2 m tracks; total track length 6 m; for a 1.0 × 1.0 m base scaffold. | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM03200114-01 |  | Ratchet wrench | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Tightens or adjusts conductor-support hardware and related assemblies. | |
| SYS-TEC-TM02120114-01 |  | Ratchet wrench with universal fitting | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Operates fasteners or hardware from a universal hot stick during energized or restricted-access maintenance. | |
| SYS-TEC-TM03140101-01 |  | Roller link stick | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Supports or guides mechanical line loads through a roller-linked insulated stick during conductor work. | |
| SYS-TEC-TM03050101-01 |  | Rope snubbing bracket | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Anchors or controls a rope to prevent uncontrolled movement during lifting and line handling. | |
| SYS-TEC-TM02120142-01 |  | Rotary blade tie stick head | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Installs, adjusts, or removes conductor ties using rotational hot-stick action. | |
| SYS-TEC-TM02120141-01 |  | Rotary prong tie stick head | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Installs, adjusts, or removes conductor ties using rotational hot-stick action. | |
| SYS-TEC-TM07130101-01 |  | Rubber blanket clamp | Insulating Cover-up Equipment | Width 75 mm (3 in); length 210 mm (8-1/4 in); maximum opening 80 mm (3-1/8 in). | Secures an insulating rubber blanket around energized parts or grounded structures. | |
| SYS-TEC-TM05050101-01 |  | Rubber glove jumper set | Insulated Jumper Tools | To be designed as per IEC, ASTM codes | Provides a temporary insulated electrical bypass so service continuity can be maintained during maintenance. | |
| SYS-TEC-TM12040102-01 |  | Running travelling ground | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Maintains a moving grounding contact on a conductor during stringing, pulling, or maintenance. | |
| SYS-TEC-TM06080115-01 |  | Scaffolding leveling jack with caster | Insulated Scaffold and Ladders | Configured for a 1.0 × 1.0 m scaffold base; supplied as stabilizer feet with casters. | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM06080301-01 |  | Scaffolding module, 0.5 x 1.0 m | Insulated Scaffold and Ladders | Scaffold module: 0.5 × 1.0 m. | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM06080101-01 |  | Scaffolding module, 1.0 x 1.0 m | Insulated Scaffold and Ladders | Scaffold module: 1.0 × 1.0 m. | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM06080102-01 |  | Scaffolding module, 2.0 x 1.0 m | Insulated Scaffold and Ladders | Scaffold module: 2.0 × 1.0 m. | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM06080109-01 |  | Scaffolding platform | Insulated Scaffold and Ladders | Scaffolding platform: 2.0 × 1.0 m (four 1.0 × 0.5 m planks). | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM12120601-01 |  | Screw ground rod | Temporary Grounding Equipment and Hot Sticks | Stem Ø 17 mm (5/8 in); total length 1500 mm (4 ft 11 in). | Provides a temporary earth electrode for grounding equipment in suitable soil. | |
| SYS-TEC-TM02120128-01 |  | Screwdriver with universal fitting | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Operates fasteners or hardware from a universal hot stick during energized or restricted-access maintenance. | |
| SYS-TEC-TM07080101-01 |  | Secondary conductor cover (LV) | Insulating Cover-up Equipment | To be designed as per IEC, ASTM codes | Temporarily covers an energized conductor to reduce accidental contact and phase-to-ground exposure. | |
| SYS-TEC-TM12160205-01 |  | Sectional hot stick | Temporary Grounding Equipment and Hot Sticks | Three-section set; total length 3950 mm (13 ft); tip Ø 32 mm; intermediate and handle sections Ø 38 mm. | Provides modular insulated reach for operating line hardware or applying grounding equipment. | |
| SYS-TEC-TM02120134-01 |  | Shepherd hook | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Hooks, pulls, or positions conductors and line hardware from an insulated distance. | |
| SYS-TEC-TM12020102-01 |  | Short circuit stick with 4 clamps for bare vertical secondary overhead systems | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Applies temporary short-circuiting and grounding connections to bare low-voltage secondary systems. | |
| SYS-TEC-TM12020101-01 |  | Short circuit stick with 5 clamps for bare vertical secondary overhead systems | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Applies temporary short-circuiting and grounding connections to bare low-voltage secondary systems. | |
| SYS-TEC-TM06080105-01 |  | Side crosspiece | Insulated Scaffold and Ladders | Side scaffold crosspiece length: 2000 mm. | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM14010101-01 |  | Signaling tape reel | De-energized Networks Equipment | To be designed as per IEC, ASTM codes | Deploys and retrieves barricade or warning tape around a controlled work area. | |
| SYS-TEC-TM03050112-01 |  | Single type lever lift wire tong support | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Raises and supports a wire tong using a lever mechanism during conductor repositioning. | |
| SYS-TEC-TM12070301-01 |  | Snap-on (duckbill-type) grounding clamp | Temporary Grounding Equipment and Hot Sticks | Main-line connection range Ø 4-29 mm; jumper/cable terminal range 16-95 mm². | Connects a temporary grounding cable to the stated conductor, busbar, bushing, or ground point. | |
| SYS-TEC-TM02120120-01 |  | Snapout cotter key remover | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Installs, holds, or removes cotter keys and retaining pins from line hardware using a hot stick. | |
| SYS-TEC-TM01100301-01 |  | Snatch block, patesca-type, with forged steel hook | Load Handling Equipment | To be designed as per IEC, ASTM codes | Redirects a pulling line and supports controlled lifting or pulling of loads during electrical network work. | |
| SYS-TEC-TM02120147-01 |  | Spiral disconnect | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Engages and disconnects suitable line fittings or hardware using a spiral hot-stick attachment. | |
| SYS-TEC-TM03130101-01 |  | Spiral link stick | Conductor Support Equipment | Rod Ø 32 mm (1-1/4 in); insulating length 960 mm (37.8 in). | Provides an insulated mechanical link for supporting or transferring conductor tension. | |
| SYS-TEC-TM03270101-01 |  | Static ground set | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Dissipates or equalizes static charge on conductors and support equipment during maintenance. | |
| SYS-TEC-TM03120101-01 |  | Strain link stick | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Provides an insulated mechanical link for supporting or transferring conductor tension. | |
| SYS-TEC-TM03170201-01 |  | Strain pole | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Transfers or supports conductor strain while maintaining electrical insulation during line maintenance. | |
| SYS-TEC-TM06040301-01 |  | Swivel hook ladder | Insulated Scaffold and Ladders | To be designed as per IEC, ASTM codes | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM01030103-01 |  | Swivel Transformer Gin | Load Handling Equipment | To be designed as per IEC, ASTM codes | Acts as a temporary lifting mast for raising or positioning transformer-related loads and line equipment. | |
| SYS-TEC-TM03200111-01 |  | Take-up trunnion | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Supports take-up and tensioning arrangements used in temporary conductor support systems. | |
| SYS-TEC-TM02120176-01 |  | Telecommunications network support hook | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Supports or positions telecommunications cables and associated network hardware. | |
| SYS-TEC-TM12020201-01 |  | Temporary grounding set for conventional secondary networks (LV), with 5 clamps | Temporary Grounding Equipment and Hot Sticks | Five clamp rods Ø 25 × 300 mm; maximum clamp connection Ø 19 mm; 25 mm² cable in four 400 mm lengths (total 1.60 m). | Temporarily bonds and grounds de-energized conductors or equipment to control hazardous induced or accidental voltage. | |
| SYS-TEC-TM12030103-01 |  | Temporary grounding set for medium-voltage networks up to 36 kV, without hot stick | Temporary Grounding Equipment and Hot Sticks | 25 mm² copper cable, total 16 m (2 × 2 m + 1 × 12 m); grounding auger Ø 17 × 1000 mm; three-section operating stick total length 3.96 m. | Temporarily bonds and grounds de-energized conductors or equipment to control hazardous induced or accidental voltage. | |
| SYS-TEC-TM12020301-01 |  | Temporary grounding set for multiplex network (LV) | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Temporarily bonds and grounds de-energized conductors or equipment to control hazardous induced or accidental voltage. | |
| SYS-TEC-TM12030101-01 |  | Temporary grounding set for overhead distribution up to 36 kV (three-phase), with insulating hot sticks | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Temporarily bonds and grounds de-energized conductors or equipment to control hazardous induced or accidental voltage. | |
| SYS-TEC-TM12030201-01 |  | Temporary grounding set for overhead distribution up to 36 kV (three-phase), with telescoping hot stick | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Temporarily bonds and grounds de-energized conductors or equipment to control hazardous induced or accidental voltage. | |
| SYS-TEC-TM12010201-01 |  | Temporary grounding set for single-phase network, with single hot stick | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Temporarily bonds and grounds de-energized conductors or equipment to control hazardous induced or accidental voltage. | |
| SYS-TEC-TM12010101-01 |  | Temporary grounding set for single-phase network, with telescopic hot stick | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Temporarily bonds and grounds de-energized conductors or equipment to control hazardous induced or accidental voltage. | |
| SYS-TEC-TM12040305-01 |  | Temporary grounding set for substation up to 138 kV | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Temporarily bonds and grounds de-energized conductors or equipment to control hazardous induced or accidental voltage. | |
| SYS-TEC-TM05090101-01 |  | Temporary jumper protection device | Insulated Jumper Tools | To be designed as per IEC, ASTM codes | Protects and controls a temporary jumper to reduce accidental contact, abrasion, or unsafe movement. | |
| SYS-TEC-TM13020301-01 |  | Tool bag for grounding set (LV), 5 clamps | Tool Bags | To be designed as per IEC, ASTM codes | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM13020101-01 |  | Tool bag for rural grounding set (single-phase) | Tool Bags | To be designed as per IEC, ASTM codes | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM03060102-01 |  | Tower type saddle | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Provides a mounting saddle for temporary conductor-support equipment on tower structures. | |
| SYS-TEC-TM05080105-01 |  | Transformer bushing clamp with insulated grip, with connector | Insulated Jumper Tools | To be designed as per IEC, ASTM codes | Connects a temporary jumper or grounding lead to a transformer bushing using the stated operating feature. | |
| SYS-TEC-TM05080105-02 |  | Transformer bushing clamp with insulated grip, with pin | Insulated Jumper Tools | To be designed as per IEC, ASTM codes | Connects a temporary jumper or grounding lead to a transformer bushing using the stated operating feature. | |
| SYS-TEC-TM05080101-01 |  | Transformer bushing clamp, with connector and eyescrew | Insulated Jumper Tools | To be designed as per IEC, ASTM codes | Connects a temporary jumper or grounding lead to a transformer bushing using the stated operating feature. | |
| SYS-TEC-TM05080104-01 |  | Transformer bushing clamp, with connector and T-type screw | Insulated Jumper Tools | To be designed as per IEC, ASTM codes | Connects a temporary jumper or grounding lead to a transformer bushing using the stated operating feature. | |
| SYS-TEC-TM05080102-01 |  | Transformer bushing clamp, with pin and eyescrew | Insulated Jumper Tools | To be designed as per IEC, ASTM codes | Connects a temporary jumper or grounding lead to a transformer bushing using the stated operating feature. | |
| SYS-TEC-TM05080103-01 |  | Transformer bushing clamp, with pin and T-type screw | Insulated Jumper Tools | To be designed as per IEC, ASTM codes | Connects a temporary jumper or grounding lead to a transformer bushing using the stated operating feature. | |
| SYS-TEC-TM02140101-01 |  | Tree trimmer | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Trims vegetation near overhead conductors while maintaining increased working distance. | |
| SYS-TEC-TM01090107-01 |  | Triple rope block | Load Handling Equipment | Width 115 mm (4-1/2 in); length 300 mm (11-3/4 in). | Provides mechanical advantage for lifting, lowering, or positioning tools and components using rope. | |
| SYS-TEC-TM10040101-01 |  | Trolley | Compact Networks | To be designed as per IEC, ASTM codes | Moves along a conductor or support path to assist installation and positioning in compact networks. | |
| SYS-TEC-TM12030501-01 |  | Truck grounding set | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Bonds a work vehicle or truck to earth to reduce hazardous touch potential. | |
| SYS-TEC-TM06110101-01 |  | Twin step ladder with fiberglass steps | Insulated Scaffold and Ladders | To be designed as per IEC, ASTM codes | Provides insulated access, working support, or structural components for elevated electrical maintenance. | |
| SYS-TEC-TM02120150-01 |  | Universal adapter | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Connects a specialized attachment to a universal hot stick for remote electrical maintenance work. | |
| SYS-TEC-TM02120175-01 |  | Universal adapter for steel sponge | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Connects a specialized attachment to a universal hot stick for remote electrical maintenance work. | |
| SYS-TEC-TM02120177-01 |  | Universal head | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Connects a specialized attachment to a universal hot stick for remote electrical maintenance work. | |
| SYS-TEC-TM02100101-01 |  | Universal pole | Insulated Hand Tools | To be designed as per IEC, ASTM codes | Accepts universal hot-stick attachments for remote operation of line hardware near energized conductors. | |
| SYS-TEC-TM12090110-01 |  | Unshrouded threaded aluminum ferrule | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Terminates a temporary grounding cable and provides a threaded connection to compatible grounding hardware. | |
| SYS-TEC-TM12090210-01 |  | Unshrouded threaded copper ferrule | Temporary Grounding Equipment and Hot Sticks | To be designed as per IEC, ASTM codes | Terminates a temporary grounding cable and provides a threaded connection to compatible grounding hardware. | |
| SYS-TEC-TM11010101-01 |  | Warning sphere 300 mm | Warning Spheres | Diameter 300 mm | Marks overhead conductors to improve visibility to aircraft and reduce collision risk. | |
| SYS-TEC-TM11010201-01 |  | Warning sphere 600 mm | Warning Spheres | Sphere diameter 600 mm (24 in). | Marks overhead conductors to improve visibility to aircraft and reduce collision risk. | |
| SYS-TEC-TM13030101-01 |  | Waterproof canvas helmet bag | Tool Bags | To be designed as per IEC, ASTM codes | Stores, protects, and transports the specified electrical maintenance tools or personal protective equipment. | |
| SYS-TEC-TM01070101-01 |  | White Braided Rope | Load Handling Equipment | To be designed as per IEC, ASTM codes | Used as a hand line, pulling line, or general-purpose rigging rope for electrical maintenance activities. | |
| SYS-TEC-TM01150101-01 |  | Winch hoist puller | Load Handling Equipment | Cable Ø 4.76 mm; single-line cable length 6000 mm; double-line cable length 3000 mm. | Provides controlled manual pulling, lifting, and tensioning for conductors, equipment, and rigging. | |
| SYS-TEC-TM10020101-01 |  | Wire handle | Compact Networks | To be designed as per IEC, ASTM codes | Pulls, guides, or positions conductor during compact-network installation and maintenance. | |
| SYS-TEC-TM14020101-01 |  | Wire rope tensioning clamp | De-energized Networks Equipment | To be designed as per IEC, ASTM codes | Grips and tensions conductor, guy wire, or wire rope during line construction, sagging, or maintenance. | |
| SYS-TEC-TM03010101-01 |  | Wire tong | Conductor Support Equipment | Rod Ø 38 mm (1-1/2 in); insulated length 1740 mm (5 ft 9 in); overall length 2160 mm (7 ft 1 in). | Supports, lifts, or repositions an energized conductor while maintaining an insulated working distance. | |
| SYS-TEC-TM03070206-01 |  | Wire tong pole clevis | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Connects a wire tong to a support or saddle assembly. | |
| SYS-TEC-TM03050105-01 |  | Wire tong saddle | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Mounts and supports a wire tong on a pole or temporary support assembly. | |
| SYS-TEC-TM03050201-01 |  | Wire tong saddle extension | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Extends the mounting position of a wire-tong saddle for temporary conductor support. | |
| SYS-TEC-TM03070205-01 |  | Wire tong stirrup | Conductor Support Equipment | To be designed as per IEC, ASTM codes | Provides a support connection point for a wire tong during conductor handling. |
